The charging pile is a universal indoor and outdoor charging pile,
which meets the IP55 protection level and can be installed in open places.
![](https://v7-upload.digoodcms.com/website_101/2024-02-17/mceu_23663747211708162349988.jpg)
Ensure that the ambient temperature ranges from -30 ° C to +50 ° C.
The installation site must not be higher than 2000 meters above sea level.
![](https://v7-upload.digoodcms.com/website_101/2024-02-17/mceu_30712845621708162358063.jpg)
There should be no violent vibration and inflammable and explosive materials near the installation site.
The installation site should not be in low-lying areas or areas prone to water accumulation.
![](https://v7-upload.digoodcms.com/website_101/2024-02-17/mceu_21244811831708162364865.jpg)
Pile driving installation must have a wall support, if there is no wall support,
it is recommended to use a dedicated floor support for installation and fixing.
![](https://v7-upload.digoodcms.com/website_101/2024-02-17/mceu_19921156641708162371048.jpg)
When installing the pile, ensure that the pile is vertical,
and the installation height ranges from the center point of the gun base to the horizontal ground: 1200~1300mm.
![](https://v7-upload.digoodcms.com/website_101/2024-02-17/mceu_3046592651708162376625.jpg)
![](https://v7-upload.digoodcms.com/website_101/2024-02-17/mceu_68560208261708162394443.jpg)